Researchers developed DIY 3D-printed peristaltic pump kits for microfluidics

2021-12-23 09:10:00 By : Mr. Jocky Wang

Click here to sign in with or

by Singapore University of Technology and Design

The development of microfluidic systems for lab-on-a-chip (LoC) and organs-on-a-chip (OoC) applications require precise fluid flow control. Typically, on-chip flows are controlled by integrating a microfluidic chip with external pumps that deliver fluid flow at the microscale (typically on the order of mL/min) through the microchannels. To this end, commercially available flow devices such as extrusion syringe pumps, peristaltic pumps and pneumatic pumps have been widely used.

Unfortunately, existing pumps suitable for microfluidic applications are usually bulky and costly. For example, pressure-controlled flow systems cost as much as US$10,000, whereas syringe pumps and peristaltic pumps cost hundreds to thousands of dollars. Pumps with a small footprint are preferred for LoC and OoC applications. While miniature pumps are commercially available, they require proprietary and expensive control systems (over US$1000). More importantly, these commercially available pumps are not amenable to customisation. Since each experiment has unique requirements such as flowrate, working environment, and available space, rapid customisation of the instrument would benefit users.

To make microfluidic pumps more accessible to the scientific community, researchers from the Singapore University of Technology and Design (SUTD) Soft Fluidics Lab developed a "highly-customisable, 3-D-printed peristaltic pump kit", where users from around the world can download the design files, 3-D-print and assemble their do-it-yourself (DIY) peristaltic pump (refer to image).

"3-D printers have become more and more affordable, and they are a commodity that is found in most scientific laboratories today. With the advancement of 3-D printing technologies, scientists no longer have to rely on manufacturers to manufacture components; they can design and print them themselves at an affordable cost. We are slowly observing the democratization of manufacturing by 3-D printing technology," said Associate Professor Michinao Hashimoto, the project's principal investigator from SUTD.

The peristaltic pump is powered and controlled by Arduino, an open-source electronics platform. "With the introduction of Arduino, precise control of motors is becoming accessible to non-experts. These open-source electronic platforms are empowering scientists with little background in electronics and programming to build complex scientific instrumentations," explained lead author Terry Ching, a joint graduate student with SUTD and National University of Singapore (NUS).

By combining 3-D-printed parts with open-source electronic prototyping platforms, the team built a peristaltic pump comparable to commercially available options at a fraction of the cost, an estimated US$50 per pump. The assembled pumps offered a wide range of flowrate for microfluidic users (0.02—727.3 μL/min). The pump also has a small footprint of around 20 × 50 × 28 mm, which can be placed in a cell incubator. Notably, the pump is designed in the form of a kit, allowing end-users to customize the setup according to their preference.

"We believe that a kit has the intrinsic ability to evoke the culture of hacking and tinkering. Hopefully, this can in turn inspire the scientific community to develop more open-source scientific infrastructure," added Professor Hashimoto.

Computer-aided design (CAD) files with detailed instructions to fabricate the pump is found in their latest publication, "Highly-customisable 3-D-printed peristaltic pump kit" in HardwareX. Explore further DIY microfluidic tool climbs to the top of the charts More information: Terry Ching et al, Highly-customizable 3D-printed peristaltic pump kit, HardwareX (2021). DOI: 10.1016/j.ohx.2021.e00202 Provided by Singapore University of Technology and Design Citation: Researchers developed DIY 3D-printed peristaltic pump kits for microfluidics (2021, December 20) retrieved 23 December 2021 from https://techxplore.com/news/2021-12-diy-3d-printed-peristaltic-kits-microfluidics.html This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Use this form if you have come across a typo, inaccuracy or would like to send an edit request for the content on this page. For general inquiries, please use our contact form. For general feedback, use the public comments section below (please adhere to guidelines).

Please select the most appropriate category to facilitate processing of your request

Thank you for taking time to provide your feedback to the editors.

Your feedback is important to us. However, we do not guarantee individual replies due to the high volume of messages.

Your email address is used only to let the recipient know who sent the email. Neither your address nor the recipient's address will be used for any other purpose. The information you enter will appear in your e-mail message and is not retained by Tech Xplore in any form.

Daily science news on research developments and the latest scientific innovations

Medical research advances and health news

The most comprehensive sci-tech news coverage on the web

This site uses cookies to assist with navigation, analyse your use of our services, collect data for ads personalisation and provide content from third parties. By using our site, you acknowledge that you have read and understand our Privacy Policy and Terms of Use.